Instrument Accessories

Condensate Pot Manufacturer in India

Mcneil Instruments is condensate pot manufacturer and supplying to various countries globally. The condensate pots are made from superior quality materials and sold at competitive rates.

The prime purpose of a Condensate seal Pot is to hold foreign material and any liquid resulting from vapour (condensate). This avoids the metering system from being damaged. Condensate pot has a pipe with a 4 inch diameter which is fixed horizontally between the flow meter and gauge. It is employed as a blockade between the chief line and the secondary mechanism to measure steam or any other vapours which may turn into liquid state in order to ensure compatibility with the secondary apparatus.

Condensate Seal Pot - Mcneil Instruments Inc

We provide a wide range of inexpensive CONDENSATE POT. There is a capture and storage of condensate. As a result, the numerous orifices stay clean and clutter-free. They are upstream from the instrument, and a bottom drain makes cleaning possible. The condensate pots can be made of a variety of materials. The primary purpose of a condensate or seal pot is to hold both foreign items and any liquid that condenses from vapor. This guards against metering system damage.

Between the flow meter and gauge, a horizontal 4-inch diameter pipe leads to the condensate pot. It acts as a blocker between the primary line and the secondary mechanism to measure steam or any other vapors that may transition into a liquid state in order to assure compatibility with the secondary apparatus. To lessen the chance of error caused by an unequal fluid head in the associated pressure lines, units should be spaced uniformly.

Types Of Condensate Seal Pot

Condensate Pot Type Two Ports - Mcneil Instruments Inc.

Condensate Pot Type Two Ports

Mcneil Instruments Inc. Two Ports Condensate Pots Manufacturer, Supplier, & Exporter in India.

Condensate Pot Type Three Ports

Condensate Pot Type Three Ports

Mcneil Instruments Inc. Three Ports Condensate Pots Manufacturer, Supplier, & Exporter in India.

Condensate Pot Type Four Ports

Mcneil Instruments Inc. Four Ports Condensate Pots Manufacturer, Supplier, & Exporter in India.

Condensate Pot Manufacturer, Supplier, and Exporter

Mcneil Instruments Inc. is the top Manufacturer, Supplier, and Exporter of condensate pots in India. We provide a wide range of inexpensive CONDENSATE POT. There is a capture and storage of condensate. As a result, the numerous orifices stay clean and clutter-free. They are upstream from the instrument, and a bottom drain makes cleaning possible. The condensate pots can be made of a variety of materials. The primary purpose of a condensate or seal pot is to hold both foreign items and any liquid that condenses from vapor. This guards against metering system damage.

Between the flow meter and gauge, a horizontal 4-inch diameter pipe leads to the condensate pot. It acts as a blocker between the primary line and the secondary mechanism to measure steam or any other vapors that may transition into a liquid state in order to assure compatibility with the secondary apparatus. To lessen the chance of error caused by an unequal fluid head in the associated pressure lines, units should be spaced uniformly.

How to Install a Condensate Pot

Installing a condensate pot is crucial for accurate flow measurement. Here’s a simplified guide to help you install it correctly, either on vertical or horizontal lines, between the primary (Flow Meter) and the secondary (transmitter/gauge). This setup acts as a barrier to the line fluid and allows direct sensing of flow conditions.

  1. Plan Connections: Before ordering, determine the number of connections you need (e.g., inlets, outlets, fill port, drain port, gas vent port).
  2. Determine Specifications: Define the volume of the condensate pot in liters. Consider the system’s pressure and temperature requirements.
  3. Heat and Insulation: Think about whether you need to heat trace and insulate all the impulse lines to prevent freezing or temperature drops.
  4. Anti-Freeze Media: You might need to add anti-freeze media, like glycol, to the water lines to prevent freezing.
  5. Keep Lines Short: Keep the vapor impulse lines as short as possible to ensure accurate measurements.
  6. Mounting Level: Ensure both condensate pots are mounted at the same level to avoid measurement errors due to unequal fluid levels in the connecting lines. The highest connection point should be your reference. Consider both vertical and horizontal steam pipelines.
  7. Mounting Position: The differential pressure (DP) measuring device should be mounted below both condensate pots and the steam pipeline.
  8. Blowdown Facility: Ensure that both impulse lines from the condensate pot to the DP have a blowdown facility. Regularly blowing down these lines helps prevent debris from affecting measurement accuracy.

By following these steps, you can ensure accurate and reliable measurements from your condensate pot installation.

Uses and Application of Condensate Pot

Condensate pots are necessary for use with steam. They serve to protect the differential pressure transmitter from heat damage by condensing the fluid upstream of it. They provide precise measurement by keeping a consistent condensate height in the impulse lines above the differential pressure transmitter when installed at the same height.

In the event that a corrosive or aggressive fluid is being measured by the transmitter, the condensation pot may also be utilized to safeguard it. Here, we’re referring to separating pots.

Why Mcneil Instruments Best Condensate Pot Manufacturers & Exporters

Being one of the leading seal pot manufacturers, we produce condensate pots in numerous materials like stainless steel, alloy steel, Monel, Hastelloy and carbon steel. Seal pots are widely employed in processing industries in addition to power plants, steel, refineries and petrochemical business. We are a renowned seal pot exporter with our suppliers based in United States of America, Dubai, Australia, Canada, Kuwait, Oman, Brazil, Lagos, Qatar, Nigeria, Saudi and several other European nations.

S31500 CONDENSATE SEAL POT, AISI 4130 CONDENSATE SEAL POT SUPPLIER, 32205 CONDENSATE SEAL POT,STAINLESS STEEL 904L CONDENSATE SEAL POT, TITANIUM 2 PORT CONDENSATE SEAL POT,STAINLESS STEEL 321 CONDENSATE SEAL POT, CONDENSATE POT MANUFACTURERS, S32750 CONDENSATE SEAL POT, F51 UNS S31803 CONDENSATE SEAL POT, UNS N02200 CONDENSATE SEAL POTSTOCKHOLDER, STAINLESS STEEL 347H CONDENSATE SEAL POT, CONDENSATE POT MANUFACTURERS IN INDIA, STAINLESS STEEL 309 CONDENSATE SEAL POT, STAINLESS STEEL 347 CONDENSATE SEAL POT, STAINLESS STEEL 321H CONDENSATE SEAL POT.

MaterialShellCapPipe ScheduleTest Pressure
Carbon SteelA-106A-105Sch.4080 Kg / Cm2
Sch.80125 Kg / Cm2
Sch.160125 Kg / Cm2
Stainless SteelSS304SS304Sch.4090 Kg / Cm2
Sch.80150 Kg / Cm2
Sch.160NA
Stainless SteelSS316SS316Sch.4090 Kg / Cm2
Sch.80150 Kg / Cm2
Sch.160NA
Alloy SteelA-335A-182Sch.40NA
A-12F-12Sch.80125 Kg / Cm2
Sch.160210 Kg / Cm2
Alloy SteelA-335A-182Sch.40NA
A-12A-12Sch.80125 Kg / Cm2
Sch.160210 Kg / Cm2
SpecialSpecifySpecify
Monel & Hastelloy

Monel :
Grade: Monel 400, Monel K500, Monel R-405
Nickel :
Grade: Nickel 200, Nickel 201
Inconel :
Grade: Inconel 600, Inconel 601, Inconel 625, Inconel 718
Incoloy :
Grade: Incoloy 800, Inconel 800H, 800HT
Hastalloy :
Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X
Titanium :
Grade: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11
Stainless Steel :
Grade: ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 304H, 316H, 316/316L, 321, 330, 347, 309/S, 310/S, 317/L, 333, 410/S, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Carbon Steel :
Grade: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70, SA105
Duplex Steel:
Grade: ASTM / ASME A/SA 182 UNS F44, F45, F51, F53, F55, F60, F61
Alloy Steel:
Grade : ASTM SA 182 – E25, E26, E27, E28, E29B, E30B, E39B, E40B, E36B, E36C, E41B, AISI4130, AISI4140, AISI4340, 42CRMO4, 16MNCR5, 20MNCR5, 21CrMoV57, EN353, EN354, F11, F22, F91, F9, P11, P22, P91, P9, P5, P92, EN42J, EN8, EN19