CHECK VALVE FEMALE
The check valve is the type of valve that is most widely used in commercial and residential complexes. Check valves from Mcneil Instruments Inc. are of the highest quality and are ideal for various situations. We are a major participant in the check valves manufacturing sector, and our brand is synonymous with quality. We like to think of ourselves as traditionalist innovators who make smarter check valves to carry out the conventional purpose. Our engineers and craftsmen are constantly searching for tools and advancements that will enable us to produce valves of the highest caliber.
Our Full Port, Female NPT (FNPT) Check Valves provide more flow and lower pressure drops than conventional check valves. Our elastomer hinge check valve design takes performance to an entirely new level by eliminating the restrictive valve seat and substantially increasing the valve’s open area and flow coefficient (Cv). They are ideal for application in vacuum pumps, compressed air and gas systems as well as in water systems where low head loss and elimination of water hammer are desirable. Mcneil Instruments Inc is the manufacturer, Supplier and Exporter of Female NPT Check valves.
Female NPT Check Valves are available in sizes up to 3″ in Carbon Steel (Zinc Dichromate plated for added corrosion resistance), 316 Stainless Steel, Brass and Aluminum. Available elastomers include Buna N, EPDM, Viton, Silicon and Teflon. Valve internal components can be customized to fit your exact application requirements.
Part no. | L | Size | HEX |
CHV-6K-S6-2T | 83(3.27″) | 1/8″ ODT | 25.4(1″) |
CHV-6K-S6-4T | 90(3.54″) | 1/4″ ODT | 25.4(1″) |
CHV-6K-S6-6T | 90(3.54″) | 3/8″ ODT | 25.4(1″) |
CHV-6K-S6-8T | 96(3.78″) | 1/2″ ODT | 28.6(1.12) |
CHV-6K-S6-12T | 96(3.78″) | 3/4″ ODT | 28.6(1.12) |
With rich expertise, we are offering a wide range of Check Valves that is generally used in flow metering applications, especially when a constant, calibrated, low flow rate must be maintained for some time, such as the idle fuel flow in a carburetor. Our needle valves are appreciated in the market for low operating torque and high tensile strength. Further, these are provided in proper packaging to the clients in order to prevent wear and tear during transportation. Needle Valves or Shut-Off Valves are designed to Isolate, Calibrate and Drain Process Lines by Line Mounting.
- Chemicals industry
- Fats and fertilizer industry
- Ship building
- Construction industry
- Check valves are used for controllng flow in one direction only. Check valves should never be used as code safety relief devices
- Lowest Pressure Drop
- Easy to Install
- Alleviates Water Hammer
- End connections available in NPT; BSPT ; Tube size; BSPP
- 100% valve are factory tested prios to despatch.
- Pressure range from 1,000 to 10,000 psi.
SIZE | A | B | CSQ | WEIGHT (kg) |
1/4″ | 93 | 55 | 25 | 0.36 |
3/8″ | 93 | 55 | 25 | 0.37 |
1/2″ | 95 | 66 | 28 | 0.46 |
3/4″ | 109 | 70 | 38 | 0.8 |
1″ | 117 | 80 | 45 | 1.3 |
Monel :
Grade: Monel 400, Monel K500, Monel R-405
Nickel :
Grade: Nickel 200, Nickel 201
Inconel :
Grade: Inconel 600, Inconel 601, Inconel 625, Inconel 718
Incoloy :
Grade: Incoloy 800, Inconel 800H, 800HT
Hastalloy :
Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X
Titanium :
Grade: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11
Stainless Steel :
Grade: ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 304H, 316H, 316/316L, 321, 330, 347, 309/S, 310/S, 317/L, 333, 410/S, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Carbon Steel :
Grade: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
Duplex Steel:
Grade: ASTM / ASME A/SA 182 UNS F44, F45, F51, F53, F55, F60, F61
Alloy Steel:
Grade : ASTM SA 182 – E25, E26, E27, E28, E29B, E30B, E39B, E40B, E36B, E36C, E41B, AISI4130, AISI4140, AISI4340, 42CRMO4, 16MNCR5, 20MNCR5, 21CrMoV57, EN353, EN354, F11, F22, F91, F9, P11, P22, P91, P9, P5, P92, EN42J, EN8, EN19