ASTM A182 F22 Alloy Steel Pipe Fittings Manufacturer, Supplier & Exporter in India, USA, Turkey & Nigeria – Mcneil Instruments
Mcneil Instruments manufactures and supplies ASTM A182 F22 Alloy Steel Pipe Fittings for pressure piping, refinery, petrochemical, power generation and other elevated-temperature applications.
ASTM A182 F22 is a 2¼Cr-1Mo chromium-molybdenum alloy steel forging grade, commonly identified as UNS K21590 and Werkstoff 1.7380. The material contains approximately 2.00–2.50% chromium and 0.87–1.13% molybdenum, providing a combination of elevated-temperature strength and resistance to oxidation and certain high-temperature process environments.
F22 fittings are available in forged configurations including socket-weld and threaded fittings. For applicable forged fittings, ASME B16.11 specifies ratings, dimensions, tolerances, marking and material requirements.
Technical Specification of Alloy Steel ASTM A182 F22 Pipe Fittings
| Parameter | Specification |
|---|---|
| Composition | Cr 2.25%, Mo 1% |
| Temperature Range | –29 °C to +670 °C |
| Tensile Strength | ≥ 620 MPa |
| Yield Strength | ≥ 320 MPa |
| Hardness | ≤ 100 HRB |
| Standards | ASTM A182, ASME SA182 |
What Are ASTM A182 F22 Alloy Steel Pipe Fittings?
ASTM A182 F22 Alloy Steel Pipe Fittings are forged piping components manufactured from 2¼Cr-1Mo alloy steel.
Chromium contributes to oxidation and scaling resistance, while molybdenum contributes to elevated-temperature strength. F22 is therefore specified in piping systems where a higher-alloy Cr-Mo material is required compared with grades such as F11.
ASTM A182 defines the material requirements for forged alloy-steel pressure components. The fitting configuration, dimensions and pressure class are determined by the applicable dimensional standard and project specification.
For socket-weld and threaded forged fittings, ASME B16.11 is the applicable standard covering ratings, dimensions, tolerances, marking and material requirements.
ASTM A182 F22 Pipe Fittings Specifications
Property ASTM A182 F22
Material Chromium-Molybdenum Alloy Steel
Grade F22
Common Alloy Description 2¼Cr-1Mo
UNS K21590
Werkstoff No. 1.7380
Material Standard ASTM A182 / ASME SA182
Fitting Standard ASME B16.11 for applicable forged SW & threaded fittings
Product Form Forged
Chromium 2.00–2.50%
Molybdenum 0.87–1.13%
F22 Classes Class 1 and Class 3
Connection Types Socket Weld, Threaded
Socket-Weld Classes 3000, 6000, 9000
Threaded Classes 2000, 3000, 6000
Final material, class, dimensions, heat treatment and inspection requirements should be confirmed against the applicable ASTM/ASME edition and purchase specification.
ASTM A182 F22 Material Classes
A key specification detail is that ASTM A182 F22 is supplied in Class 1 and Class 3. There is no standard F22 Class 2 designation in ASTM A182. The two classes have the same basic chemical composition but different mechanical-property requirements and material conditions.
Property F22 Class 1 F22 Class 3
Carbon 0.05–0.15% 0.05–0.15%
Manganese 0.30–0.60% 0.30–0.60%
Silicon 0.50% max. 0.50% max.
Chromium 2.00–2.50% 2.00–2.50%
Molybdenum 0.87–1.13% 0.87–1.13%
Tensile Strength 415 MPa min. 515 MPa min.
Yield Strength 205 MPa min. 310 MPa min.
Elongation 20% min. 20% min.
Reduction of Area 35% min. 30% min.
Hardness 170 HBW max. 156–207 HBW
Class 1 therefore has the lower minimum strength requirement, while Class 3 provides the higher minimum tensile and yield strengths.
Chemical Composition of ASTM A182 F22
The principal alloying elements in F22 are chromium and molybdenum.
Element ASTM A182 F22
Carbon (C) 0.05–0.15%
Manganese (Mn) 0.30–0.60%
Silicon (Si) 0.50% max.
Phosphorus (P) 0.040% max.
Sulfur (S) 0.040% max.
Chromium (Cr) 2.00–2.50%
Molybdenum (Mo) 0.87–1.13%
Iron (Fe) Balance
F22 is commonly described as 2¼Cr-1Mo because of its nominal chromium and molybdenum content.
Mechanical Properties of ASTM A182 F22
The mechanical properties depend on the F22 class.
F22 Class 1
Tensile Strength: 415 MPa min.
Yield Strength: 205 MPa min.
Elongation: 20% min.
Reduction of Area: 35% min.
Hardness: 170 HBW max.
F22 Class 3
Tensile Strength: 515 MPa min.
Yield Strength: 310 MPa min.
Elongation: 20% min.
Reduction of Area: 30% min.
Hardness: 156–207 HBW
These are material specification requirements and should not be treated as allowable design stresses. Design allowable stresses depend on the applicable code, temperature, material condition and component geometry.
Manufacturing Process of ASTM A182 F22 Fittings
The manufacturing process for F22 forged fittings involves controlled forming, heat treatment and machining.
Typical stages include:
Raw material selection
Heat-number identification
Chemical verification
Heating
Forging
Controlled forming
Heat treatment
Machining
End preparation
Dimensional inspection
Surface inspection
Non-destructive examination where specified
Marking
Final inspection
Documentation
Export packing
Manufacturing parameters are controlled according to the fitting configuration, size, material class and applicable specification.
ASTM A182 F22 Applications
ASTM A182 F22 fittings are commonly specified in:
Oil refineries
Petrochemical plants
Power generation
Steam piping
Process piping
Hydrocarbon processing
Chemical processing
Furnace systems
High-temperature process lines
Hydrogen-related process systems
Heat-treatment systems
Industrial heating systems
The actual suitability of F22 depends on design temperature, pressure, fluid chemistry, hydrogen environment where applicable, corrosion mechanisms, material condition and the governing design code.
Advantages of ASTM A182 F22 Pipe Fittings
-
Excellent resistance to high-temperature corrosion and oxidation
-
Superior mechanical strength for high-pressure steam and fluid systems
-
Great weldability and machinability for complex piping layouts
-
Suitable for cyclic and continuous high-temperature service
-
Long service life, reducing maintenance and downtime costs
Alloy Steel ASTM A182 F22 Pipe Fittings Supplier & Exporter for USA, Turkey & Nigeria
Mcneil Instruments manufactures and exports Alloy Steel ASTM A182 F22 Pipe Fittings for industrial applications across the USA, Turkey, and Nigeria, offering chromium-molybdenum alloy fittings engineered for high-temperature and high-pressure service. With approximately 2.25% chromium and 1% molybdenum, F22 fittings provide excellent creep strength, oxidation resistance, mechanical durability, and reliable performance under thermal stress. They are suitable for power generation, refineries, petrochemical and chemical plants, boilers, heat exchangers, superheaters, steam pipelines, turbines, and oil & gas systems. The fittings are manufactured to ASTM A182 / ASME SA182 standards and can operate across a specified temperature range of -29°C to +670°C, with custom sizes and configurations available for project-specific requirements in these international markets.
Why Choose Mcneil Instruments?
-
ISO-certified production and global quality compliance
-
In-house forging, heat treatment, and CNC machining systems
-
Custom fabrication for specialized project requirements
-
Global supply network — fast delivery to UAE, USA, Africa & worldwide
-
Dedicated technical support and full quality documentation
Looking for premium ASTM A182 F22 Pipe Fittings for your next industrial project? Connect with Mcneil Instruments today — your trusted global partner for high-performance piping solutions.
Frequently Asked Questions – Alloy Steel ASTM A182 F22 Pipe Fittings
What are ASTM A182 F22 pipe fittings used for?
ASTM A182 F22 pipe fittings are widely used in high-temperature and high-pressure piping systems, including power plants, petrochemical units, boilers, and refinery process piping due to their superior strength and creep resistance.
What makes F22 alloy steel pipe fittings special?
F22 alloy steel offers excellent heat resistance, corrosion strength, and fatigue durability. Its chromium-molybdenum composition ensures dependable performance in harsh operating conditions like steam systems, reactors, and hot-oil services.
Are ASTM A182 F22 pipe fittings suitable for high-temperature applications?
Yes. ASTM A182 F22 fittings can operate efficiently in elevated temperatures up to 670°C, making them ideal for superheater tubes, steam pipelines, and thermal power operations.
Do you provide custom-manufactured sizes and configurations?
Yes, custom sizes, thicknesses, and specialty configurations are available to meet project-specific needs for industries worldwide, including the UAE, USA, Europe, Asia, and Africa.
Which industries commonly use F22 alloy steel pipe fittings?
Industries include power generation, chemical processing, oil & gas refineries, thermal plants, fertilizer units, and other demanding high-pressure operations.
Can I order ASTM A182 F22 fittings in bulk?
Yes. We supply bulk orders with fast global delivery, ensuring timely dispatch for urgent and large-scale industrial projects.